L O A D I N G

GReddy Produce by TRUST
Home / 86/BRZ

86/BRZ

  • [ZN6/ZC6]GReddy Oil Pan Baffle Plate

    GReddy Oil Pan Baffle Plate for ZN6/ZC6 Product Features A louvered baffle plate that balances the prevention of engine oil drop and uneven distribution in the oil pan.While preventing the uneven distribution of engine oil that easily occurs during acceleration, deceleration, and cornering, it also achieves smooth return of engine oil to the oil pan.We made optimal shape for oil strainer stabilize absorption of engine oil.   Product Specifications Material: Stainless steelIncluded: Silicone gasketCompatible with stock oil pan and T518Z oil pan   MODEL : TOYOTA 86 / SUBARU BRZ Vehicle model: ZN6 / ZC6Model year: 12.04~ / 12.03~ TRUST CODE: 13515904JAN CODE: 4991995664864Price (tax included): ¥18,700 [Price before tax:

  • [ZN6/ZC6]GReddy Bolt-on Turbo Kit TD06SH-20G 8cm2

    GReddy Bolt-On Turbo Kit TD06SH-20G 8cm2 for ZN6/ZC6 Product Features Turbine : TD06SH-20G 8㎝2 Power : 350～450PS Big capacity intercooler (TYPE28) Possible to control during the high boost more stable than actuator type of TURBINE KIT. Included 6 springs for the waste gate valve. It is possible to set the boost pressure in detail. (Boost pressure 25～160kPa) Exhaust pipe of waste gate valve choose OPEN AIR type(Competition use only ) or RETURN type *Installation requires reinforcement of the engine body and fuel system.     Parts Configuration Turbine : TD06SH-20G 8cm2 EX.Manifold Air cleaner Intercooler TYPE 28 Piping West gate Muffler front tube Remarks Separate ECU setting is required.Additionally, either

  • [ZN6/ZC6]GReddy Airinx B Type for ZN6/ZC6 (post minor-change)

    GReddy Airinx B Type ZN6/ZC6 (post minor-change) Following the minor model change, the airbox has been redesigned to give optimum induction. Improves high-end power and makes more aggressive induction sound. An improved and lightened air intake plate, is designed to give fresh air via the stock air duct By blocking hot air from the radiator, it helps prevent power loss often seen from high intake temperatures. 「GReddy Direct Air Intake for 86/BRZ」「GReddy Direct Suction for 86･ BRZ (post minor-change)」 by using these products together, it gives more efficient induction With its 3D net construction, and high efficiency 2-layer filter, it brings improved dust collection and filtration. With its ideal proportions

  • [ZN6/ZC6/ZN8/ZD8]GReddy Air Intake GT TY-23GT

    GReddy Air Intake GT TY-23GT Special high performance fabric filter gives much improved induction efficiency! Product Features By adopting a laminated structure with steel mesh, high rigidity and durability are achieved. The rubber frame completely seals gaps, preventing even fine dust from coming into the intake pipe. Achieving high performance and high quality with outstanding cost performance. Easy installation by simply replacing the stock filter. Compatible Vehicles: 86 Late Model / BRZ Applied Model E Vehicle Model: ZN6 / ZC6Model Year: 16.08~ / 16.08~Transmission: MT Compatible Vehicles: GR86 / BRZ Vehicle Model: ZN8 / ZD8Model Year: 21.10~ / 21.08~Transmission: MT,AT   Product Number: TY-23GTTRUST CODE: 12512523JAN CODE: 4991995070221Price (Tax Included):

  • [ZC6 ]GReddy OIL COOLER CIRCUIT SPEC After Minor Model Change type

    GReddy Oil Cooler Kit Circuit SpecZC6 After Minor Change Due to the minor change, the shape of the air cleaner box, headlights, and bumper have been modifiedNewly designed hose length for the post-facelift model Product Features The oil cooler core is installed on the right side of the opening of the front bumper which is hardly affected by the radiator Adopted nylon mesh hose which is lightweight, flexible and easy to install on oil cooler and less aggressive to body Adopted the baffle plate for by the cooling effect of -8 ° C. than without baffle plate. Specifications Oil Cooler 10 row(NS1010G) Built-in thermostat (Operation temperature (75℃〜82℃ ±2℃) Include baffle

  • [ZN6/ZC6]GReddy OIL COOLER KIT After Minor Model Change

    GReddy OIL COOLER KIT For ZN6/ZC6 After Minor Model Change Due to changes in styling, the shape of the air cleaner box, headlights, and bumper have been modifiedThe hose length and air guide (86) have been newly designed for the later model Product Features The oil cooler core is installed on the right side of the opening of the front bumper which is hardly affected by the radiator Adopted nylon mesh hose which is lightweight, flexible and easy to install on oil cooler and less aggressive to body A ‘Circuit Spec’ with an air guide has been introduced for further cooling effectInstalling the air guide results in an 8°C reduction

  • [For 86/BRZ]GReddy Direct Suction Post-MC

    GReddy Direct Suction for 86/BRZ Post-MC Reduce air resistance. Make a handsome engine room. Product Features The GReddy Direct Suction reduces intake resistance with its straight internal structure, promoting smooth air intake. Additionally, the use of carbon fiber material achieves weight reduction while giving the engine compartment a racing appearance. Installation Example: GReddy Direct Suction + Stock Cleaner Box Installation: GReddy Direct Suction + GReddy Air Intake Kit TY-M043   Compatible Vehicles: Toyota 86 (Post-MC MT) / Subaru BRZ (Applied E-type onwards MT) Vehicle Model: ZN6 / ZC6 Model Year : from 2016.08 Exclusively for Post-MC MT vehicles. *For Pre-MC MT/AT vehicles and Post-MC AT vehicles, the GReddy Direct Suction

  • [ZN6/ZC6]GReddy Bolt-on Turbo Kit T518Z-10cm2 non-Catalyzer

    GReddy Bolt-on Turbo Kit T518Z-10cm2 non-Catalyzer Bolt-On Turbo Kit for Automobile Regulation conformity Without tunned fuel system, the maximum powr approximate 280 ps (Genuine + 100ps), the maximum torque 30kg-m / 3800rpm (Test data by manufacturer) Over 25kg-m from 3200rpm to rev limit 7200rpm. All range from normal rev to high rev are torque full. For wide power band, it si easy to drive from town to circuit driving.   * 86/BRZ TURBO KIT MAIN ECU DATA (include BOOST UP DATA) adapted only for the first model. Without catalyzer ■CODE 11510404 ■PRICE YEN 440,000 without tax ■Car Type 86(ZN6) / BRZ(ZC6) ■Year 86:14.04〜 / BRZ:14.03〜16.06   Note Only For Competition

  • [ZN6/ZC6] GReddy AIRINX GT TY16

    GReddy Air Inx GT ZC6/ZN6 TY-16GT Genuine replacement type High performance air cleaner   Product Features Special high performance fabric filter gives much improved the induction efficiency. Steel mesh lamination construction, gives the filter more rigidity and durability. The rubber frame completely seals gaps, preventing even fine dust from coming into intake. High performance and high quality, at a reasonable price. It is a direct swap for the genuine air filter, and can be easily replaced.   Remarks Late Model/Applied Model E Not compatible with MT   MODEL : TOYOTA 86 / SUBARU BRZ 86 Early Model/BRZ Applied Models A to D Vehicle type : DBA-ZN6 / DBA-ZC6 Engine type

  • [ZN6 / ZC6/ SJ5]GReddy Pressure Adapter

    GReddy Pressure Adapter Precise & reliable parts for taking out pressure from Intake Manifold Product Features Extracts vacuum by installing between the pressure sensor on top of the engine and the intake manifold The union position can be changed flexibility by the engine cover processing (the first model’s). With GReddy logo / Blue alumite finish Include : Dia 5 Hose union, O ring, Long tapping screws, Flange bolts [Compatible Vehicles]TOYOTA 86 / SUBARU BRZ / SUBARU FORESTAR Vehicle Model: ZN6 / ZC6 / SJ5 Engine Model: FA20 / FB20 Model Year: 12.04~ / 12.03~ / 12.11~Notes: Compatible with TOYOTA 86 pre-facelift/facelift, SUBARU BRZ Applied Models A to E CODE: 11910101

  • [86/BRZ]GReddy Engine Oil FA20-SP 5W-40

    GReddy Engine Oil FA20-SP 5W-40 86/BRZ exclusive engine oil with superior engine protective performance Product Feature The development concept of this oil was the aim to engine protection on the high load, quick response, and power loss reduction for 86/BRZ which is easy to raise the oil temperature during the high speed range. This is a high performance oil for both NA and supercharged car. The base oil adopted 「GReddy Tri-Ester Formulation with PAO」 which constituted three thermoduric and lubricity ester and PAO. By the special ester which has a characteristic to adsorb electrically to the metal surface, this makes strong oil film from dry start to heavy high temperature
  • no image

    [ZN6/ZC6] OIL COOLER KIT CIRCUIT SPEC Limited ver./ OIL COOLER STANDARD KIT Limited ver.

    GReddy OIL COOLER KIT For ZN6 CIRCUIT SPEC Limited ver. GReddy OIL COOLER KIT For ZN6 STANDARD Limited ver. Debut new limited color of BRZ Oil cooler. Discontinued Product Features Released the limited product for answering passionate owner want to unify with red colors for interior and engine room. The red color core kit appeared in limited 86 units only for popular 86 / BRZ engine oil cooler. The CIRCUIT SPEC has applied mat black alumite to not only oil cooler core but baffle plate for improving corrosion resistance. Included original ornament plate which is with serial number. Product Specifications OIL COOLER STANDARD (10 units only) Oil Cooler 10 row(NS1010G)

  • [ZN6/ZC6]GReddy Oil Cooler Kit Standard Type Circuit Spec 10-Row

    GReddy Oil Cooler Kit Standard Type Circuit Spec 10-Row ZN6/ZC6 For the 86/BRZ, oil temperature becomes extremely critical during continuous laps on a circuit, making the installation of an oil cooler essential. Compared to the standard oil cooler kit, this kit includes an air guide plate to aim for higher cooling efficiency, considering circuit use. We conducted repeated circuit tests and focused on developing the core position and hose material. The oil cooler core is installed on the right side of the front bumper opening to minimize impact on the radiator (water temperature), and we’ve adopted durable and lightweight nylon mesh hoses.   Product Specifications Engine Oil Cooler 10 Row

  • [ZN6/ZC6]GReddy Oil Cooler Kit Standard 10 Row

    GReddy Oil Cooler Kit Standard 10 Row ZN6/ZC6 For the 86/BRZ, oil temperature becomes extremely critical during continuous laps on a circuit, making the installation of an oil cooler essential. We conducted repeated circuit tests and developed with particular attention to core position and hose materials. The oil cooler core is installed on the right side of the front bumper opening to minimize impact on the radiator (water temperature), and we’ve adopted durable and lightweight nylon mesh hoses. *The installation image above is for the circuit specification. The standard type does not include an air guide plate. Product Specifications Engine Oil Cooler 10 Row Oil Block High Mount Type (with

  • [For ZN6, ZN8/ZC6, ZD8]GReddy Power Extreme R

    Remarks Compliant with Acceleration Noise Regulations, Compatible with All Grades AT/MT   [Sound]   [Compatible Vehicles]Toyota 86, GR86 / Subaru BRZ Compatible models: DBA-ZN6, 4BA-ZN6, 3BA-ZN8 / DBA-ZC6, 4BA-ZC6, 3BA-ZD8Engine model: FA20, FA24Model years: 2012.04～, 2021.10～ / 2012.03～, 2021.08～ TRUST CODE: 10113301JAN CODE: 4991995920014Price (Tax Included): ¥218,900 [Base Price ¥199,000 (Tax Excluded)]

  • [ZN6/ZC6]GReddy COMFORT SPORT GT-S ver.3

    GReddy COMFORT SPORT GTS ver.3 Debut the 3rd series with Evolving style and Performance. Product Features Adopt the straight structure pursuing exhaust efficiency which reputed in GReddy muffler series. Replace after the catalyzer (3 pieces / material Stainless) Dual Four outlet design with impact. The rear silencer has a GReddy logo plate (registered design). Product Specifications Drive system : FR Separate/Bore : 3 pieces Dia.60 – Dia.60 x2 Replacement Area: From Catalytic Converter Onwards Tale style : Dia. 102 N/S GTS Minimum under clearance : 115 mm/Pipe of under rear member Material : Stainless 304 Genuine proximity noise while stationary : 82 dB(right & left)/5250 rpm Proximity noise while stationary

  • [ZN6/ZC6]GReddy COMFORT SPORT GT-S ver.2

    GReddy COMFORT SPORT GT-S ver.2 for ZN6/ZC6 Replace from center pipe. Sporty and emphasize performance. This muffler is more sporty and higher performance than GReddy COMFORT SPORT GTS. Main pipe is divided into dual from center, and it makes possible to use straight layout. This provides more horse power and more clearance to the road. Small silencers which are placed both left and right sides are 3.7kg lighter than the original one. It helps the better dynamic performance of car. Pursuing comfortable sound and power & high response suitable to NA. Adopted Heat gradation of the tail end. Between the left and right silencer, there is a GReddy logo plate

  • [ZN6/ZC6]GReddy COMFORT SPORT GTS

    GReddy COMFORT SPORT GTS for ZN6/ZC6 Rear Muffler Replacement Type Pleasant Sound Designed with a stylish and sporty theme to enhance the vehicle’s design. Made entirely of stainless steel with a buffed finish, combining luxury and durability. By utilizing the original mid-pipe and replacing only the rear muffler, it offers excellent cost performance and allows you to easily obtain a sporty sound. Additionally, for the 86/BRZ models, a newly designed silencer structure achieves both a pleasant street sound and power. Product Specifications Separate/Bore : 1 pieces Dia.60 (at the connection part with Genuine pipe) Exchange parts : Rear Piece Material: SUS Tale style : Dia 115 Genuine proximity noise while

  • GReddy INTELLIGENT INFORMETER TOUCH

    GReddy INTELLIGENT INFORMETER TOUCHAdopted a 3.5 inch full color touch panel screen. Superior visibility, easy operation. Digital multi monitor that can display many vehicle informationSimple connect to diagnostic link connector, the unit can display from a large list of factory ECU signal items. You can choose monitoring item from 5 display pattern and 6 read-out styles, data are monitored and recorded and playbacked. Except displaying vehicle data, it can display diagnostic code, clear code( only for CAN communication vehicle), fuel economy measurement, gear position, power estimation can be displayed, f-manage and v-manage compatible and can be connected to an optional sensor (boost, oil temperature, oil pressure) etc, having many abilities.

  • [ZN/ZC6]GReddy CIRCUIT SPEC EXHAUST MANIFOLD

    GReddy CIRCUIT SPEC EXHAUST MANIFOLD for 86/BRZ This Ex manifold is that GReddy SPORT CATALYZER EX MANIFOLD’s catalyzer has changed to the straight pipe without catalyzer. Adopted 4-2-1 layout for high exhaust efficiency. Eliminate the fall of the torque in the middle range that occured in normal car, and connect smoothly up to high revolution. Realized high response which is fun of NA. * By replacing the Sports Catalytic (selling separately). it becomes vehicle regulation correspondence Specification Main Pipe : Dia.42 – Dia.45 – Dia.60 Material : Stainless(flange : plating) Volume of the product : 94 dB(right)･ 94 dB(left)/5225 rpm(with GReddy CS-GTS ver.2Muffler) Volume of genuine : 82 dB/5252 rpm(normal)

  • GReddy Reinforced Actuator

    GReddy Reinforced Actuator Possible to set the pressure in detail without removing the rod because of turnbuckle. Actuator body is made by Aluminum machining and possible to disassemble. Rod Assy material is Stainless. Using Profec (Boost Controller) together, the keen boost rising phase and the droping boost pressure at the high rev is possible to control. The performance of the extreme actuator can be demonstrated more. Compatible Vehicles Compatible Models CODE Base Price (Excluding Tax) Price (Tax Included) Specifications 86 ZN6 11511600 ¥29,800 ¥32,780 Extreme Actuator for TURBO KIT BRZ ZC6 11511600 ¥29,800 ¥32,780 Extreme Actuator for TURBO KIT

  • GReddy CIRCUIT SPEC FRONT PIPE

    GReddy CIRCUIT SPEC FRONT PIPE Product Features More effective exhaust efficiency was realized by removing the catalyzer part for exhaust tuning. *For competition use only. Not adapt to the automobile inspection.     Compatibility Chart  

  • GReddy Over Pipe GR86/86/BRZ

    GReddy Over Pipe GR86/86/BRZ Product Features By expanding Dia 60 of the joint pipe between the first catalyzer and the second catalyzer from Genuine Dia 50, the exhaust efficiency improved effectively. Using the combination with GReddy Sport Catalyzer EX Manifold and CS Muffler, further performance will be anticipated. Simple substance use is possible. Specifications Fittable Grade : All grade Separate/Bore : 1 pieces Dia.60 Replace part : the first catalyzer – the second catalyzer Material: SUS Automobile Regulation conformity (It may become incompatible in combination with an outsider product.) Compatible Models: GR86/86/BRZ Vehicle Models: DBA-ZN6, 4BA-ZN6, 3BA-ZN8 / DBA-ZC6, 4BA-ZC6, 3BA-ZD8 Model Years: 04.2012~, 10.2021~ / 03.2012~, 08.2021~ CODE :

  • [ZN6/ZC6] GReddy Straight pipe without catalyzer

    GReddy Straight pipe without catalyzer for ZN6/ZC6 Removed catalyzer from Sport Catalyzer. Product Features For 86/BRZ, you can make the EX. Manifold with sports catalytic converter and T518Z/T517Z/T620Z turbo kits catalytic converter-less. Since the check lamp of the engine may light up after installation, ECU setting may be necessary. Don’t use on the public road after installation because of without catalyzer. * The following products are available * 86/BRZ TURBO KIT with Catalyzer T518Z T/K CODE : 11510403 Price including tax: ¥602,800 [Price excluding tax: ¥548,000] ･ T517Z T/K CODE: 11510411 Price including tax: ¥602,800 [Price excluding tax: ¥548,000] ･ T620Z T/K CODE : 11510406 Price including tax: ¥624,800 [Price

  • [ZN6/ZC6]GReddｙSPORT CATALYZER

    GReddｙSPORT CATALYZER for 86/BRZ The simple substance Catalyzer is for using GReddy T518Z TURBO KIT without Catalyzer or GReddy EX.MANIFOLD CIRCUIT SPEC as preservation standard conformity When a catalyst is necessary in the regulation of a circuit or the competition, it is available. MODEL : 86/BRZ Car Type : ZN6/ZC6 CODE : 10611001 Price YEN 65,000 without tax Note for 86 : Adapted to 17inch 6MT/6AT, 16inch 6MT Note for BRZ : Adapted to BRZ 17inch 6MT/6AT

  • [ZN6 / ZC6]GReddy SPORT CATALYZER EXHAUST MANIFOLD

    GReddy SPORT CATALYZER EXHAUST MANIFOLD Product Feature Adopted 4-2-1 layout for high exhaust efficiency. Eliminate the fall of the torque in the middle range that occured in normal car, and connect smoothly up to high revolution. Realized high response which is fun of NA. Catalyzer adopted 200dpi. Automobile Regulation conformity MODEL : 86/BRZ Car type : DBA-ZN6 Year : 12.04～ *Fittable Post Model(MT/AT) Car type : DBA-ZC6 Year : 12.03〜 *Fittable Post Model(MT/AT) CODE : 10612001 PRICE : YEN 203,000 without tax Note ; 86 / 17inch for 6MT/6AT, 16inch for 6MT BRZ / 17inch for 6MT/6AT Specification Main Pipe : Dia.42 – Dia.45 – Dia.60 Material : Stainless(flange :

  • EcuTek86_03

    EcuTeK GReddy ver. EcuTek is a cuttoing edge of 86/BRZ ECU tune. This is GReddy versio of EcuTek. By optimizing the program with the ECU tune for the fuel and ignition timing which changes with tuning, the original performance of parts and cars will be shown.In addition to basic correction, EcuTek GReddy version also carries out essential control for enjoying sports driving such as speed limiter cutting and radiator fan control. EcuTeK GReddy version Full data EcuTeK GReddy version Full data corresponds to combination with the following parts. Corresponding parts Muffler : CS-GTS, GS-GTS ver.2, Power Extreme R, Super Street Titan Air Cleaner : AIRINX-GT, AIRINX B * or Genuine

  • GReddy WATER TEMPERATURE ADAPTER 86/BRZ

    GReddy Water Temperature Adapter for GR86/86/BRZ Specifically designed for GR86/86/BRZ. Enables safe installation of temperature sensors. Product Features When attempting to install a temperature sensor attachment to the radiator upper hose of GR86/86/BRZ, the hose bends, potentially causing coolant leaks.GReddy Water Temp Adapter is designed to change the genuine upper hose joint to a specialized part and makes the adapter pick-up more secure.Note: Radiator cap not included. Please purchase the GReddy Radiator Cap N Type (CODE:13901003) or reuse the original cap. Product Specifications Sensor size: 1/8PT Material: Aluminum Treatment : Blue alumite   Included Items Dia 8 hose union Plug union (1/8PT) Compatible Vehicles: Toyota 86, GR86 / Subaru BRZ

  • SENSOR ATTACHMENT HI-MOUNT TYPE

    SENSOR ATTACHMENT HI-MOUNT TYPE It is a SPACER KIT which raises the engine side oil filter mounting surface by 23 mm for secure the clearance to install the sensors.. CODE : 12002802 PRICE : YEN 7,000 without tax

  • Sensor Terminal

    GReddy Sensor Terminal General oil sensor pick-up adapter that is suitable for Greddy oil block’s M18 screwed hole. 3 pieces of 1/8PT sensor holes are located in the body for 120degree angle distance. Mainly it is effective if there’s no space except around main body of oil line. To enlarge inner diameter of sensor hole, even temperature sensor is projected into oil pipe line, it is designed to obtain sufficient cross section area. The length of sensor is suitable within 30mm long that includes screwed area.(The sensor that has protuberance at the tip of 1/8PT is not possible to attach 2 sensors) In terms of the feature of the products,

  • [ZC6/ZN6] GReddy ENGINE HOOD LIFTER

    GReddy Engine Hood Lifter Assist for the opening and shutting of the bonnet. It improves workability in the engine room by allowing the bonnet to be fixed without a lock stay. Hood Open Image Specifications For Genuine bonnet Real Carbon Surface Cylinder Attach by bolt-on without machining. Reference working time : 30 min Compatible Vehicles: Toyota 86 / Subaru BRZ Model: ZN6 / ZC6 Model Year: 12.04~ / 12.03~*Confirmed to fit late model TRUST CODE: 18510101 JAN CODE: 4991995980223 Price (Tax Included): ¥27,500 [Price before tax: ¥25,000]

  • ZN6 FRONT SKIRT

    ZN6 FRONT SKIRT FRONT SKIRT (URETAN) MODEL / TYPE : 86 / ZN6 Year : 12.04 〜 16.06 CODE:17010098 Price including tax ¥33,000 [Base price: ¥30,000 (tax excluded)] Note : Down approximate -17 mm from Genuine bumper. Not adapt to pst model . Available for purchase at the GReddy ONLINE SHOP

  • ZN6 AERO KIT STANDARD VERSION

    ZN6 AERO KIT STANDARD VERSION STANDAR VERSION 3 pieces KIT (FRP) Detail : Front Under Spoiler, Side Skirt , Rear Under Spoiler MODEL / TYPE : 86 / ZN6 Year : 12.04 〜 16.06 CODE : 17010221 Price (Tax Included) ¥173,800 [Base Price: ¥158,000 (Tax Excluded)] Note : Each 20mm wider than genuine. Not adapt to the post model. FRONT UNDER SPOILER (FRP) MODEL / TYPE : 86 / ZN6 Year : 12.04 〜 16.06 CODE : 17010211 Price (Tax Included) ¥59,400 [Base Price (Tax Excluded): ¥54,000] Note : Over all length +55 mm long. Down approximate -15 mm from Genuine bumper. Size : Wide 1775mm. Not adapt to the

  • GReddy×ROCKETBUNNY AERO KIT WIDE VERSION

    WIDE BODY 5 pieces KIT (FRP) MODEL / TYPE : 86 / ZN6 Year : 12.04 〜 16.06 CODE : 17010223 Price (tax included): ¥323,400 [Price before tax: ¥294,000] Detail : Front Under Spoiler, Side Step, Front / Rear Fender, Rear Under Spoiler Not adapt to the post model   WIDE BODY 3 parts KIT (FRP) MODEL / TYPE : 86 / ZN6 Year : 12.04 〜 16.06 CODE:17010222 Price (tax included): ¥212,520 [Price before tax: ¥193,200] DETAIL : SIDE STEP, FRONT/REAR FENDER Note: Not adapt to the post model     WIDE VERSION FRONT FENDER (FRP) MODEL / TYPE : 86 / ZN6 Year : 12.04～ CODE : 17010212

  • GReddy Aluminum Pulley for ZN6 / ZC6

    GReddy Aluminum Pulley for ZN6 / ZC6 Various aluminum pulleys for that greatly improving engine response Product Features A lightweight aluminum pulley kit made of fully machined duralumin with anodized finish. The lightweight pulley design allows for a quicker engine response. We offer a full set including alternator pulley, water pump pulley, tensioner pulley, idler pulley NO.1 x2 / NO.2, as well as a two-piece set with alternator pulley and water pump pulley. Compatible Vehicles: Toyota 86 / Subaru BRZ Car Type : TOYOTA 86 / DBA-ZN6 , SUBARU BRZ / DBA-ZC6 Engine type : FA20 Year : 12.03〜 GReddy Aluminum Pulley Kit Full Set (6 pieces) Alternator pulley, water

  • GReddy Direct Suction ZN6/ZC6

    GReddy Direct Suction ZN6/ZC6 Reduces intake resistance and enhances the engine room’s appearance Product Features The standard rubber pipe has an accordion shape, which creates resistance during intake. GReddy Direct Suction features a straight internal structure to reduce intake resistance and promote smoother air intake. Additionally, by using carbon fiber material, it achieves weight reduction while giving the engine room a racing-inspired look. Product Specifications Plain weave carbon fiber (clear gel finish) Designed to reduce intake resistance and increase efficiency, not compatible with sound creator or resonator connections Compatible with OEM cleaner box and GReddy Air Inx Kit (sold separately) Parts Configuration ･ Carbon suction pipe main body･ 70φ silicone

  • [ZN6/ZC6]GReddy Direct Air Intake

    GReddy Direct Air Intake for ZN6/ZC6 Directly take in the outside air, the intake temperature drastically down. Installing the duct inside the grill, it prevents sagging of the heat by actively taking in the fresh air from the outside. It is more effective when used together with AIRINX – B than genuine air cleaner box. Genuine air cleaner box is also correspondence. Specifications FRP Intake duct (Blear gel coating) To attach Genuine air cleaner box or GReddy AIRINX B is available. (Do not adapt to cars with GReddy Turbo KIT.) For mounting, following processes are necessary, Installation disassembly of the bumper, Reinforcement parts drilling, some plastic parts cutting. Compatible Vehicles:

  • [ZN6/ZC6]OIL PAN for TURBO KIT

    OIL PAN for TURBO KIT Oil Pan with welding a oil return tube When installing the T518/T620Z turbo kit, this eliminates the need for alignment and welding of the oil return tube, significantly reducing installation time.   ･ CODE: 11912001 ･ Price (Tax Included): ¥25,300 [Price before tax: ¥23,000]

  • GReddy Bolt-On Turbo Kit T518Z-10cm² for ZN6/ZC6

          Compatible vehicles: TOYOTA 86 / SUBARU BRZ ■Vehicle Model: 86(ZN6) / BRZ(ZC6)■Model Year: 86: 12.04~ / BRZ: 12.03~16.06   Kit with Catalytic Converter Maximum output 191kw(265ps), Set boost pressure 39.2-49.0kpa(0.4-0.5kg/cm2) ■CODE: 11510403 ■Price (inc. tax): ¥610,500 [Price before tax: ¥555,000] Remarks Not compatible with BRZ(4BA-ZC6)Vehicle inspection compliant (All 17-inch vehicles compatible, only 86 6MT compatible for 16-inch vehicles) Can be installed simultaneously with oil cooler kit Setting tool is not included in the kit (GReddy Performance ECU available here) Stock catalyst: Catalytic converter included, stock secondary catalyst usedCompatible with stock plugs･ Download Vehicle Emission Test Results Certificate     Kit without Catalytic Converter Maximum output 206kw(280ps), Set
  • no image

    [86/BRZ] GReddy EXTREME ACTUATOR and MAIN ECU DATA for T518Z TURBO KIT with Boost up

    EXTREME ACTUATOR for 86/BRZ 86/BRZ T518Z Turbo Kit MAIN ECU DATA for Boost Up The boost up menu of the 86/BRZ turbo tune comes up   Product Feature EXTREME ACTUATOR for 86/BRZ ■ Turnbuckle rod can adjust the pressure delicately without removing parts ■ Using together with Profec Boost Controller is possible to control the quick start boost and the boost drop on the high rev. MAIN ECU DATA for 86/BRZ T518Z TURBO KIT with boost up ■ Upgarade data for already instaled customer of MAIN ECU DATA for T518Z TURBO KIT ■ Using EXTREME ACTUATOR or Profec (Boost Controller) , Maximum 320PS under 0.8kg/cm can be output. Product Specification

  • BRZ ZC6 / FRONT SKIRT

    FRONT SKIRT (URETAN) MODEL / TYPE : BRZ / ZC6 Year : 12.03〜16.06 CODE : 17060060 Price including tax: ¥33,000 [Price excluding tax: ¥30,000] Note : Down approximate -17 mm from Genuine bumper. Applide model A/D Available for purchase at the GReddy ONLINE SHOP

  • [For ZN6/ZC6]GReddy Bolt-On Turbo Kit T620Z

    Compatible vehicles: TOYOTA 86 / SUBARU BRZ ■Vehicle Model: ZN6 / ZC6 ■Engine Type: FA20 ■Model Year: 12.03 ~ ■Turbine: T620Z-10cm2 P850 (Optional dedicated oil pan available) *Only models with catalytic converter are compliant with vehicle inspection   GReddy Bolt-On Turbo Kit T620Z with Catalytic Converter Maximum output 243kW (330PS), Set boost pressure 68.6-78.4kPa (0.7-0.8kg/cm2) ■CODE: 11510406 ■Price (tax included) ¥632,500　[Price before tax: ¥575,000]   Remarks Not compatible with BRZ (4BA-ZC6)Compliant with vehicle inspection (All 17-inch vehicles compatible, only 86 6MT compatible for 16-inch vehicles) Oil cooler kit can be installed simultaneously *Setting tool not included in the kit (Separate ECU setting required) Catalytic converter included (1st catalyst section), 2nd

  • [ ZN6,ZN8/ZC6,ZD8]GReddy Aluminum Radiator TW-R

    [Compatible Vehicles] Toyota 86, GR86 / Subaru BRZ Vehicle Model: ZN6,ZN8/ZC6,ZD8 Engine Type: FA20,FA24 Model Year: 12.04~, 21.10~ / 12.03~, 21.08~ Note: Compatible with MT/AT   CODE : 12013803 JAN CODE: 4991995219569 Price (Tax Included): ¥59,400 [Base Price ¥54,000 (Tax Excluded)]

Are you looking for something?

Top

車種別検索

> カテゴリ > 適合結果

メーカー名を選ぶ

車種名を選ぶ

絞り込み

車両型式を選ぶ

閉じる