L O A D I N G

GReddy Produce by TRUST
Home / MAZDA

MAZDA

  • [ND Roadster] Aero Kit Front Skirt

    GReddy Aero Kit Mazda Roadster NDFront Skirt Product Features Material is urethane.This is good styling as well as function and performance. It is designed with consideration of the air flow to the lower surface of the bumper, to enhance the rectification effect. Product Specifications FRONT SKIRT made by urethane.Overray type.Non-painting . Attche by 2 tapping screws and adhesive tape (2 drilling holes ) Note : Over all length +47 mm long. Down approximate -25 mm from Genuine bumper. GReddy Aluminum emblem Include. Vehicle Type:Roadster/Roadster RF Vehicle Model: ND5RC/NDERC Model Year: 15.05~/16.12~ CODE : 17040141 Price (tax included) ¥33,000 [Base price: ¥30,000 (tax excluded)] Available for purchase at the GReddy ONLINE

  • ROADSTER / NCEC

    ROADSTER / NCEC   FRONT BUMPER (FRP) Model / Type : ROADSTER / NCEC Year:05.08〜14.09 CODE:17040200 Price (Tax Included): ¥93,500 [Price before tax: ¥85,000] Note: Exclusive for early model (up to 08.11) / Full bumper approximately 50mm lower than the standard bumper (OEM replacement), white gel coat finish, unpainted, compatible with OEM tow hook Side Skirt L/R (FRP) Model / Type : ROADSTER / NCEC Year:05.08〜14.09 CODE:17040201 Price (Tax Included): ¥72,600 [Price before tax: ¥66,000] Note : For NC1 and NC2, Not confirmed for NC3 / Down approximate -20mm from Genuine Side Skirt / Replace from Genuine / White gel coating, no paint REAR BUMPER (FRP) Model / Type :

  • ATENZA / GJ FRONT SKIRT

    GReddy AERO KIT ATENZA (GJ) FRONT SKIRT Debut the front skirt which ATENZA has been seen sporty with practical use. Product Features The material of the front skirt is urethane which is soft and shock resistant This design and utility is superior to impact resistance if scratched. Product Specifications Attach by 4 tapping screws and adhesive tape (2 drilling holes on the folder parts of tire house are necessary) FRONT SKIRT made by urethane.Overray type.Non-painting . Down approximate -15mm from Genuine bumper With end moldings (Gray) Common for Sedan/Wagon Exclusive for Early Model Car Model : MAZDA ATENZA Car Type : GJ type Engine type : SH-VPTR Model Year: 2012.11

  • ATENZA / GG3S/ES GY3W

    ATENZA / GG3S/ES GY3W REAR SPOILER(FRP) Model / /Type : ATENZA /GG3S/ES、GY3W Year:03.08〜05.06 CODE:17040116 Price (Tax Included): ¥83,600 [Price (Tax Excluded): ¥76,000] Note : only for the first model (〜05.6) For Hatchback model / For Sedan, drilling holes are necessary.   Front Skirt (Urethane) *This product has been discontinued. Model / /Type : ATENZA /GG3S/ES、GY3W Year:03.08〜05.06 CODE:17040111 Price (Tax Included): ¥31,900 [Price (Tax Excluded): ¥29,000] Note : only for the first model (〜05.6) Grade : Hatchback -23Z、23S、23C、20F , Wagon -23Z、23S

  • CX-5 KE Front Skirt

    GReddy AERO KIT CX-5(KE) FRONT SKIRT Debut the front skirt which CX-5 has been seen sporty with practical use. Product Features The material of the front skirt is urethane which is soft and shock resistant This design and utility is superior to impact resistance if scratched. Product Specifications MAZDA CX-5 Attach by 4 tapping screws and adhesive tape (4 drilling holes on the folder parts of tire house are necessary) FRONT SKIRT made by urethane.Overray type.Non-painting . Approximately 15mm lower than the standard bumper. *End molding not included for CX-5. Compatible with facelift model Model : MAZDA CX-5 Vehicle Model: KE Series Engine Type : SH-VPTS Model Year: 12.02 –

Are you looking for something?

Top

車種別検索

> カテゴリ > 適合結果

メーカー名を選ぶ

車種名を選ぶ

絞り込み

車両型式を選ぶ

閉じる