ｚｃ31ｓ

[ZC31S]GReddy Front Knucle Bracket

GReddy Front Knucle Bracket Product Features Hi camber angle specification Front knuckle bracket as version up replace part Camber bolt is unnecessary and 3 ° negative camber is attached. Adapted product : Performance Damper SZ−PD-001 Adopted vehicle serial number : ･ ZC31S-****-0 ･ ZC31S-****-1 ･ ZC31S-****-2 CODE : 14491120 Price Including Tax: ¥14,080 [Base Price: ¥12,800 (Tax Excluded)]
[ZC31S]GReddy Brake Line Kit

GReddy Brake Line Kit Achieve direct brake feelingVehicle-specific design improves installation workability and maintainability Product Features High-pressure-resitant brake line kit consists of a Teflon(R) hose and a braided stainless cover hose. Swivel type steel fitting is adopted for the body-side Stock-equivalent type hose mounting stays are included. Vehicle- inspection-ready, with 1-year product warranty *’Teflon’ is a registered trademark of The Chemours Company FC, LLC. MODEL : SUZUKI SWIFT Sport Car Type : ZC31S Year : 05.09〜10.09 code: 15092101 Base price: ¥35,200 (¥32,000 excluding tax) Product number: SZ001
[ZC31S] GReddy Breather Tank

GReddy BREATHER TANK Product Feature When air develops in the coolant inside the radiator, it can cause overheating. The GReddy Breather Tank is designed to remove air that has formed in the coolant. It creates a vortex inside the tank to capture air, using natural centrifugal force to separate the air from the coolant. Only the coolant is then returned to the radiator, allowing for more efficient heat exchange in the radiator. MODEL : SUZUKI SWIFT ■ Compatible Vehicle: CBA-ZC31S ■ Engine Model: M16A ■ Model Year: 09/2005 – 03/2010 ■ Code: 12095300 ■ Price (Tax Included): ¥17,380 [Base Price: ¥15,800 (Tax Excluded)] ■ Notes: Compatibility confirmed for models after
[ZC31S/ZC21S]GReddy Oil Cooler Kit

GReddy OIL COOLER KIT Product Features This oil cooler has big amount of core which equips offset fin inside of the core tube. And it helps to enrich the radiation, and at the same time, it prevents the pressure loss. The “sandwich block” which is used at the place of original oil filter makes it possible to reduce the amount of parts and it helps your installation work easier. By using TRUST OIL FILTER, the effect gets even better. Product Specifications Mounted on the side of the radiator Core : 10 row, AN part : #10 Block : Standard Block built-in thermostat. Operation temperature : 75℃～82℃±0 Fitting: TRUST original fitting
[ZC31S]GReddy BL COMFORT DOWN SPRING

GReddy BL COMFORT DOWN SPRING Product Features GReddy BL Comfort Down Spring fulfills 3 performance factor ‘comfortable ride’ ‘best form’ ‘durability of sag’ and automobile regulation conformity. It is specially designed for each vehicle model over 400 kinds for optimized drop down. The comfortable ride is not sacrificed, suitable low down amount generates the stylish form. MODEL : SUZUKI SWIFT Car Type : ZC31S Year : 05.10～ CODE : 14091317 Price (Tax Included) ¥ 35,200 [Base Price: ¥32,000 (Tax Excluded)] Note : 1.6L,2WD Car Type : ZC21S Year : 04.11～ CODE : 14091316 Price (Tax Included) ¥ 35,200 [Base Price: ¥32,000 (Tax Excluded)] Note : 1.5L,2WD
[ZC31S]GReddy Rear Camber Adapter

GReddy Rear Camber Adapter Product Features Developed for the time up on the circuit based on the past circuit running data. The effect has been demonstrated in Tsukuba fastest lap. Line-up necessary parts for time-up at reasonable prices. Normally, Torsion beam type suspension is that the toe-in & camber is fixed and can not be adjusted. Attaching the GReddy Camber Adapter is possible to adjust camber and toe-in. Rear camber angle : approximate -2° 30’ Rear toe-in angle : approximate 0° 50’(Standard : approximate -1°〜 -1°20’) MODEL : SUZUKI SWIFT Car Type : ZC31S Year : 05.10～ CODE : 14093400 Price (Tax Included): ¥13,618 [Base Price ¥12,380 (Tax Excluded)] Note
[ZC31S]GReddy Performance Damper TYPE-S

GReddy Performance Damper Type-S Product Features Developed on the circuit tests by the SWIFT demo car under the supervision of Takeshi Tsuchiya, Japanese racing driver. The circuit-ready dumping characteristics with supple and smooth feelings widely covers various scenarios such as daily transport and competition. Adopted the mono tube shock absorber with Dia 46mm big piston which is superior to the rise of initial damping force. The special shock absorber fluid which is resistant to heat degradation has been developed. Adopted 32-step dial adjustable dumping. It adopts needle type valve that can be adjusted in all area of damping force control. The width of damping adjust is from circuit drive level
[ZC31S]GReddy CIRCUIT SPEC EXHAUST MANIFOLD

GReddy CIRCUIT SPEC EXHAUST MANIFOLD Product Features 4 in 1 Manifold type. Dia 42 – Dia 50. Material : Stainless For competition use only, designed superior to the exhaust efficiency. The minimum load clearance is lower than Genuine at the oil pan. The load clearance is 107mm by the car with our Performance Dumper (recommended car hight) MODEL : SUZUKI SWIFT Car type : CBA-ZC31S Engine type : M16A Year : 05.09～10.03 code : 10590601 Price (Tax Included): ¥96,800 [Base Price ¥88,000 (Tax Excluded)] Note : Only for competition
M16-SP 0530 Series

M16-SP 0530 Fully Synthetic Oil Special Oil for only SWIFT GReddy M16-SP 0530 has been developed for sport driving of SWIFT with the concept of the high oil pressure stability under high temperature and high load, the high response decreasing viscous resistance, and the decreasing power loss. With superior low temperature viscous property, this high performance oil protects the high performance engine under all condition which include from cold district to high temperature area, from town-use to circuit-run, no limit of weather condition and driving situation. The base oil adopted 「GReddy Tri-Ester Formulation with PAO」 which constituted three thermoduric and lubricity ester and PAO. By the special ester which has
GReddy Ram Air Duct

GReddy Ram Air Duct for ZC31S Directly introduces running wind from the grille opening, improving charging efficiency with a powerful ram pressure effect. Higher ram air effect can be achieved when installed simultaneously with the GReddy Carbon Front Grille. *Internal data: In tests with the supercharged Swift No. 1 vehicle, ram air installation resulted in a boost pressure increase of 0.1K. It consistently demonstrates installation effectiveness. Half-carbon specification Two specifications are available: half-carbon and black gel FRP. Vehicle Model Model Year Specifications Price (Tax Included) Base Price (Excluding Tax) Code Remarks CBA-ZC31S 05.9~ Half-carbon ¥66,000 ¥60,000 12595003 Standard filter. Compatible with AIRINX-GT SZ7. Cannot be installed simultaneously with GReddy Oil
[ZC31S]GReddy AERO KIT FRONT SKIRT ver.2

ZC31S GReddy AERO KIT FRONT SKIRT ver.2 The Front Lip Spoilar for ZC31S has been changed. The front skirt which the utility had debuts. The front lip spoiler adapted an urethane material which is flexible .This design and utility is superior to impact resistance if scratched. Progressive design more than the previous model . Vehicle Type : SWIFT SPORT Car Type : ZC31S Engine type : M16A Year : 05/09～10/09 CODE : 17090004 Price (Tax Included): ¥31,900 [Price (Tax Excluded): ¥29,000] Remarks Attche by 4 tapping screws and adhesive tape (4 drilling holes on the foldered parts of tire house are necessary) FRONT SKIRT made by urethane.Overray type.Non-painting
[ZC31S] Carbon Front Grill

GReddy Carbon Front Grill for ZC31S Our front grill provides both the sporty appearance and improves air flow characteristic. By using together with the GReddy Ram Air Duct, it provides maximum ram air effect. Our front grill provides both the sporty appearance and improves air flow characteristic. By using together with the GReddy Ram Air Duct, it provides maximum ram air effect. Model Year Price without tax CODE Note CBA－ZC31S 05.9～ YEN40,000 17091000 Replace type from Genuine. Attach by Attach by adhesive tape . (To cut the rib of Genuine bumper is need)
SWIFT SPORT ZC31S／REAR UNDER SPOILER / FRONT SKIRT / REAR WING

FRONT SKIRT (URETAN) MODEL / TYPE : SWIFT SPORT / ZC31S Year : 05.09〜10.09 CODE : 17090000 Price : YEN 23,000 without tax Note : 2 drilling holes on the foldered parts of tire house are necessary) Down approximate -15 mm from Genuine bumper. REAR WING SPOILER (CARBON) MODEL / TYPE : SWIFT SPORT / ZC31S Year : 05.09〜10.09 CODE : 17071002 Price : YEN 85,000 without tax Note : Used genuine holes. Material of attchment prace is FRP (Use black genuine caps) REAR UNDER SPOILER(FRP) MODEL / TYPE : SWIFT SPORT / ZC31S Year : 05.09〜10.09 CODE : 17090001 Price : YEN 33,000 without tax Note : 2 drilling

メーカー名を選ぶ

車種名を選ぶ

車両型式を選ぶ

お探しの製品カテゴリーを選択（複数可）