L O A D I N G

GReddy Produce by TRUST
 
back_image%ef%bc%bfwebimage

GReddy Profec MAP

map_image

GReddy Profec MAP is possible to control more accurate the boost pressure control by using many factors with GReddy Profec.
The more, specification evolved to connect to Profec MAP is, not only boost compensasiton control by map but parameter setting with PC connection ( to use USB cable separately sold ) and gear position and speed and engine revolution and accel pedal angle display and data logger ability and display contrast change related to illumination brighness and to connect to remote control switch ( to use switching harness separately sold) etc, variation is wide.
This is the item that adds more specification with keeping its body compact and you can fully utilize this ability as a developed boost management system.

  • CODE:15500215
  • Price:¥17,000(without tax)
  • Remark:Use as GReddy ProfecBuy GReddy PRofec as option you need

Profec MAP explanation video

Download Profec software

If you want to use GReddy Profec MAP, you need to download Profec MAP software.

Download

As you want to use Profec MAP, any update for your main software, connect to server via Profec MAP software.
You can download Profec MAP software from here.

  • File name:profec-map-installer-v207.zip
  • Data size:7.3M

software System requirement

  • OS:(Japanese,English)Windows Vista、Windows 7(32bit,64bit)
    ※ Windows XP might work but we are not recommended to use this OS because of supporting operation has been finished
  • CPU: More than 1GHz 32bit or 64bit processor
  • System memory: More than 1GB HDD
  • Free sapce: More than 20MB

Product specification

Boost pressure calibration by calibration map.

Pick up the vertical axis(load),then boost pressure will controlled by following DUTY control from the point of horizonal axis(RPM) intersection.
※You can also control by only boost or following data value by SET and MAP.
※Only Profec control when you take away the ProfecMAP

map
  • Boost calibration MAP
    There has 3 mode LO BOOST / HI BOOST / SCRAMBLE ,either one has available to control by 2 face of boost calibration MAP
  • Each gear calibration MAP with 10×10 calibration MAP are possible to control boost for any gear.
  • All tempreture calibration MAP has same mode of temperature calibration MAP. You can control the boost pressure on any cases to protect your turbo, for example until engine gets warm enough or when it nearly overheated situation.

RPM・Throttle position・Speed・Gear position・Tempreture boost control

RPM recognition

RPM signal are practical until 8-cylinder
Even without RPM signals, recognition works from crank angle.

Throttle position recognition

Acquisition Voltage from throttle signal, There recognize throttle opening(%)

Speed recognition

Speed(Km/h) are recognizing from car speed pulse.

Gear position recognition

By recognizing gear, We can show it in real-time and also capable for MAP calibration. Maximum gear calibration are 6 stages and showing in real-time are available for 8 stages.

Temperature recognition

As you making temperature table for any value, almost every temperature sensor are available.

Other useful equipment

Extrnal switch

rimosui

By fitting switching harness, Other switch capable for high, low boost or switching to SCRAMBLE system.
Also previous GReddy remote controller switch are possible to use

Shows car information in real-time

Item will add to Profec monitor in real time.
You can fit as compact screen without using several other screens.

※RPM shows in 3-digit(8000rpm→800rpm)
※According to the update for Profec side, Boost design(Lo,Hi,SC) setup are also changing.

MAP trace equipment

Connect to main PC , As you can show it in painted frame to recognize by your sight ,while you are down loading.

Data logging equipment

You can use as datalogger while you are connecting to the PC

Switching of illumination linkage luminance

You can change the main screen luminance by switching Daylight mode and Night mode

Tagged with:    

Are you looking for something?

Top